Quantity   Component name
1 × PTX PCB The PTX PCB is the controller on the Trap Box...This would get too long if I were to print out the whole BOM, but it's in the attached Eagle files
1 × PRX PCB The PRX PCB is the controller on the Remote
2 × Long-Range NRF24L01+ modules I've had really bad luck leading to wasted time while using the cheap modules. It's definitely worthwhile to spring for the slightly more expensive (~$10 for a pair) modules
1 × HS-322 Servo Current iteration uses a servo, I'm hoping that the solenoid version will be ready soon.
1 × 7.2V NiCad battery This battery will power the PTX
1 × Set of 3D-Printed components See attached zip file containing .stl files. Must print Trap Box (2 parts, upper and lower) 2x Trap Box Buttons, Remote Box (2 parts, box and cover) and 5x remote buttons.