Quantity   Component name
1 × Arduino Nano If you get a version without header pins, you can fit it in the smaller case. Be sure you have the proper data cable for the Nano.
1 × 24 LED NeoPixel Ring You can get this with or without leads soldered on
1 × 4xAAA Battery holder The case is designed for a holder without a switch like these on Amazon. https://www.amazon.com/gp/product/B01GVDGA5S
1 × 330 Ohm Resister
1 × 1000 micro farad polarized 25v capacitor
1 × Normally Open Momentary Contact Push Button The hole in the case is sized for this button. Set of three from Amazon. https://www.amazon.com/gp/product/B0D7Z2WQWP
1 × 3D Printed Cylinder Case STL in the files section
1 × 3D Printed Game Cover Print with clear filament. Friction fit to case. STL in the files section.
1 × Wheel Top SVG Mask (Optional) SVG can be used in most vinyl cutting software. File in the files section.
1 × Winning Wedge SVG (Optional) SVG can be used in most vinyl cutting software. File in the files section. Sized to highlight the winning areas.