Close
0%
0%

Over-engineered Decade Box

MCU controlled resistor decade box

sufSUF
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
691 views
9 comments
5 followers
I've seen recently on EEVBlog (https://www.youtube.com/watch?v=LXIoZBCr3Xk&list=UU2DjFE7Xf11URZqWBigcVOQ) a resistor decade. I knew in the very first moment, I want one, and also I know that I hate that kind of rotary switches.
So, I want to created a decade box without them. In this one, I'll use MCU, relays, relay drivers, power supply, LED or LCD display, microswitches, and so.
It will be totally over-engineered, costly thing. And it will be fun designing and building it.
  • 1 × MSP430G2452 16bit MSP430 value line Microcontroller
  • 1 × MCP23017 16Bit I2C I/O Expander
  • 3 × MCP23008 (PCF8574) 8Bit I2C I/O Expander
  • 24 × Rayex LEG-5F PCB mount 5V Relay
  • 3 × ULN2803 8xDarlington Array

View all 31 components

Enjoy this project?

Share

Discussions

jaromir.sukuba wrote 01/02/2016 at 23:46 • point

Are you going to push this one further?

In autumn 2014 I spent few days in bed with flu. As I couldn't do anything else, I watched older episodes of EEVblog, especially one with decade box teardown. Immediately I thought about making resistor box - binary of course. I went as far as selecting appropriate 0,25% low tempco resistors from Mouser to set up the binary resistor chain. Later, sanity kicked in and I scrapped the project. 

Interesting enough, it was about the same time you started this project and resulted in similar topology.

  Are you sure? yes | no

SUF wrote 01/03/2016 at 05:07 • point

Hi,

This is still in my plans, but I think, this will take a while. In the last few years, I had several project ideas, I started to work on plenty of it. Finally I realized, that my projects didn't go anywhere. So a few month ago I decided, to work on them one-by one. Trying to finish my half completed projects.
As this one is just an idea in my head (and collected parts), probably not the first one I'll finish. Now I'm working on my build siren, what is almost ready (few days left).

  Are you sure? yes | no

jaromir.sukuba wrote 01/03/2016 at 12:42 • point

Yes, understood. I have "a few" half-baked projects too - that's why I scrapped the resistor box, not mentioning the fact I don't need any resistor box :-)

Good luck finishing the projects, sometimes it is boring and annoying, but the result is worth all the work.

  Are you sure? yes | no

Stefan-Xp wrote 07/23/2014 at 18:21 • point
Non of the mentioned projects did feature a MCU?
I think it is a rather interessting quest ;-)
I did a 9-Value-PC-Controllable-Decade-Box on my day job a time ago, that was easy :-D
A seven decade resistor box has 70 switching points.
Would be interessting to see a nice overengineered Seven-Decade box with lots of relays or optocouplers ;-)

Best regards!

  Are you sure? yes | no

SUF wrote 07/24/2014 at 04:43 • point
seven decade is great, but why 70 switching points? If we are talking about MCU controlled one it can be binary and the UI decimal. In theory it can be achieved with 24 switching points (2^24). :-)
My intention was to do it in 2^10 increments and not using the values above 1000. With 24 relays I can achieve a scale from 1R to 16M

  Are you sure? yes | no

SUF wrote 07/23/2014 at 11:56 • point
Hi,
Thank you for your reply. Corrected the typo.
I was not aware of the projects you mentioned. Seeing the second one I deeply reconsider to even start to working on this project.
Thank you,
Zoltan

  Are you sure? yes | no

davedarko wrote 07/23/2014 at 12:05 • point
Oh crap, that was not my attention :( I thought they would be helpful but not killing a project :(

  Are you sure? yes | no

SUF wrote 07/23/2014 at 12:13 • point
Never mind! I've plenty ideas in my head, just not enough time to work on them. I'll post other projects instead of this. :-)

  Are you sure? yes | no

Similar Projects

Why is there no brake lights on bicycles? Let's make some!
Project Owner Contributor

Bicycle brake light message

theis-borgTheis Borg

Cheap target kettle gets the IoT treatment
Project Owner Contributor

IoT Kettle Australia

bhammerbhammer

I have an old OLED display (curved LG) from a broken TV. The screen looks good so I'm investigating how I can light up individual OLEDs.
Project Owner Contributor

Ambient OLED display re-use

adam-quantrillAdam Quantrill

Use an old ATX case from a PC and a ATX power supply and an additional 36V/5A CC PSU and convert these to a flexible Lab/Bench Power Supply
Project Owner Contributor

Flexible WiFi logging ATX CC/CV Bench Power Supply

bjornbjorn

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "Over-engineered Decade Box", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.