With-EPDM-ring.jpg

Added a bit of EPDM rubber (left over pond liner, aka roofing rubber) to grip the bottom side of the PCB

JPEG Image - 173.13 kB - 01/29/2025 at 01:15

Preview

PCBholder2-F360.jpg

Fusion 360 screen shot of the two printed parts

JPEG Image - 124.42 kB - 01/18/2025 at 03:49

Preview

PCBholder2-2parts.jpg

Two PCB holders, one with the top not yet screwed on

JPEG Image - 68.30 kB - 01/18/2025 at 03:49

Preview

PCBholder2-6parts.jpg

6 parts of the PCB holder screw together. One prior to assembly (foreground), one open, laying down, and one holding a Pi Pico. In the background are the Dalek-like previous spring-loaded version.

JPEG Image - 259.18 kB - 01/18/2025 at 03:46

Preview

PCBtop.stl

STL file for PCB holder top, aka nut holder or knurled knob. To fit 1/4-20.

Standard Tesselated Geometry - 8.39 MB - 01/18/2025 at 03:43

Download

PCBbase.stl

STL file for PCB holder base, for 16 mm magnet and 1/4-20 threaded rod.

Standard Tesselated Geometry - 665.22 kB - 01/18/2025 at 03:43

Download