Quantity   Component name
1 × Raspberry Pi 5, 4, 3B+, 2, 2B, Zero or clones Most models of Raspberry Pi that have the same footprint as the modern models (Including Pii Zero)
1 × Pijuice Zero Pijuice Battery Input Board (Zero Variant) - From PiSupply.
1 × Adafruit 128x64 OLED Bonnet Joystick + Buttons.
2 × 90 Degree GPIO expanders Can be found on AliExpress and Ebay.
1 × Adafruit 40 Pin GPIO Ribbon Cable Ribbon cable to connect both halves of device together.
1 × 25000 mAH Battery Can be found on Pisupply.
1 × 2.8 Inch GPIO Screen Can be most GPIO screens that fit the Raspberry Pi. I recommend the Waveshare 2.8 Capacitive Touchscreen
1 × Various M2.5 Bolts, Nuts, and Brass Standoffs Best to have a small kit of this size of fastener.
1 × Small standard Raspberry Pi Fan Can be any Third Party fan for Raspberry Pi (Standard Size)
1 × 3D Printed Case and Shields Will be linked in the project details (Eventually) The case is still in development.
1 × NOTE: ALL COMPONENTS SUBJECT TO CHANGE