Himanshu Dada-
1Assemble the Hardware
Connect the RC522 RFID reader to the ESP32-S3 using the SPI communication interface.
-
2Configure the Development Environment
Install the ESP32 board package and required RFID libraries in the Arduino IDE.
-
3Upload the Firmware
Compile and upload the source code to the ESP32-S3 development board.
-
4Register Authorized Cards
Scan RFID cards and save the UID values that should be allowed access.
-
5Perform Validation Tests
Present both authorized and unauthorized cards to verify correct operation.
-
6Deploy the System
Install the hardware in a secure enclosure and integrate it into the desired application.
Smart RFID Authentication System with ESP32-S3 and
Create a secure RFID authentication system using the ESP32-S3 and RC522 reader. The project enables fast, contactless user verification.
Discussions
Become a Hackaday.io Member
Create an account to leave a comment. Already have an account? Log In.