Thanks to 72 donors we just reached 64% of the current donation campaign for the prototypes that corresponds to about 8000 euros, and we still have to collect 4500 euros to reach the final goal of 12500 euros.

ACube Systems have selected the assembly line for the production of the prototypes.

We have more than 2000 electronic components in our motherboard, and due to the current global shortages of electronic components it was quite a difficult task to order all of them so that they could be delivered in time for production of the prototypes that is fixed for October 2021. After  tireless work of the guys at ACube the 98% of the components is now secured and will be delivered on time. The hunting is still ongoing for the remaining forty components left, and finding them is crucial not to miss the October deadline.

Design new Heatsink pipes

We have started to address the design and production of the new modified heatsink pipes which are different from the original pipes provided with the Slimbook Eclipse. A proper passive heat exchanger is vital as our PowerPC Motherboard is mounting an MXM video card that is quite different in shape from the original x86 motherboard that had the video chips mounted directly on the board.

Three AMD MXM-A video card needed for prototypes

We are still investigating how we could collect the additional funding required to pay for three MXM-A 3.0 type A (82 mm x 70 mm) that have a maximum power consumption of 55W. These video cards are fundamentals and we must get them by October as we must carry out the mechanical tests to check to find out that they properly fit inside the prototypes.

More info