EMME "Technology is not complicated"

You can customize the control prism code to prepare different ignitions sequence, the accelerometer can detect your "tap" movements.

Neodymium magnets, each principal parts with its own microprocessor, wifi module and battery are important points of the design.

No wires, no connectors, no screws, Let's go!! 

I feel really good teaching with Emme concepts, Now after 3 weeks of my first kids robotic camp here in Calpe - Alicante - Spain.

17 kids from 6 years to 13 are starting in robotics, sketching, programming, 3D printing and 3D modeling here in Calpe.

With Emme Technology is not complicated

Hi World, 

Really I learn about Emme possibilities with my first Kickstarter Campaign with Emme, I need new solutions for lower the cost to have a Ready to Run Project for less than 100 bucks.

Thanks for the 4 people who bought a Maker License now I know sell Maker License with Manuals, videos, bill list to help makers to have their own custom Emme is possible.

Thanks too for the baker who bought a ready to run option for the Off Road Model.

Some Foundations are interested in using Emme at educational projects and now I´m thinking about the pedagogic support materials, at the same time teaching in Robotics Kids Camp here in Calp, Spain it's helping me to open more my mind, Really its very interesting teach kids from 6 to 13 years old 3 hours a day at the same time in organics teams.

Let's go, I am on the Road!!!

Now after the end of the Kickstarter Campaign last July I have more time to prepare the new Electronics,

I love the new ESP32 and its low cost at high quality is perfect for Emme, I´m designing a new PCB board where "click" the ESP32-DevKitC. 

My actual prototypes use the Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500, this module is a piece of cake for the firsts prototypes but for lower the cost and to have BLE and more power I really like the Espressif option.

These new board it's going to include BLCD controller, RGB LEDs, lipo charger and much more.

Thanks once more to Esppressif who help me with their Support at the technical part and with his newsletter about Emme.

Hi, last 1 of June after some hours after launch the Kickstarter campaign Emme was selected as project we love.

A lot of to think, Emme is a perfect ambassador of a new path to design Technology, but I need to work a lot to evolution its parts and components to lower the 3D printing time and the cost of the motors and electronics. 

Emme Ready to Run versión must be between $90 and $120, and I need to study how to share with free cost the maker's license for a private use.

Now I´m redesigning the electronics to use the new ESP32 from Espressif.

Thank

God for the opportunity and for your help in every moment

Firmware Upload to Github at:

https://github.com/salvadorhurtado/emme_firmware