The 'Configum-2' FPGA module

Description

This tiny 30x30mm module fits into standard PLCC84 socket and offers:
Artix-7 FPGA, 64Mb configuration flash, 1Gb DDR3, 16Gb eMMC, ESP32 dual-core controller, 64Mb external firmware flash, USB host, 4-channel motor controller, 24MHz oscillator, dual power supply that provides 1.8V and 3.3V to external circuit with over 3A budget, on-board debug LEDs, differential ADC, up to 61 external I/O ports.
FPGA and ESP32 share most of the external pins and can work in parallel.
Configum-2 is ideal for ultra-dense high-end boards for robotics, AI, industrial, wearables, etc.
Can't beat that! B-)

The project is available to the Circuit Maker community: https://workspace.circuitmaker.com/Projects/Details/Konstantin-Dimitrov-6/Configum-2-FPGA-Controller-Module

Files

Configum-2.pdf Schematic Adobe Portable Document Format - 709.12 kB - 10/14/2020 at 08:30		Preview

Discussions

ostropest wrote 12/17/2019 at 22:25

great, when I can run linux on this device and working offgrid for 12h?

Are you sure? yes | no

EngineerAllen wrote 07/24/2017 at 18:37

its like a SoC

Are you sure? yes | no

Kn/vD wrote 07/24/2017 at 19:08

Well, yes. That's what it is - a hybrid SoC

Are you sure? yes | no

EngineerAllen wrote 07/25/2017 at 04:12

maybe cheaper in low volume

Are you sure? yes | no

Dylan Brophy wrote 07/25/2017 at 04:02

But better (I think)

Are you sure? yes | no

The 'Configum-2' FPGA module

Become a Hackaday.io member

Just one more thing

Description

Files

Configum-2.pdf

Enjoy this project?

Discussions

Become a Hackaday.io Member

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member