Close
0%
0%

therm

Tiny PID controller to control the temperature of anything!

ethanzoncaethanzonca
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
6.1k views
3 comments
87 followers
View Gallery
Therm is a very small PID controller with an OLED display and USB. It supports driving a solid-state relay for driving large loads, or a transistor for driving small loads. When attached to a computer, it will support live graphing and uploading of data. The design is based around a STM32F0 microcontroller and the MAX31855 thermocouple-to-digital IC.

I started this project as a way to start developing with the STM32 line of ARM microcontrollers, as most of my previous experience has been with AVRs. My goal is to create a very small PID controller with onboard display and USB on a single-side-populated PCB so they can be manufactured cheaply.

Currently I have all of the peripherals (except USB) up and running and my code is partially complete. Over time I will post more information about what I've already done and problems that I have solved. The source code will be made open-source once I'm a little further along.

  • 1 × STM32F042 Microprocessors, Microcontrollers, DSPs / ARM, RISC-Based Microcontrollers
  • 1 × SSD1306 128x32 OLED Display
  • 1 × MAX31855

  • Rev.2 Up and Running

    ethanzonca • 04/07/2015 at 16:56 • 0 comments

    Therm rev2 is up and running! I don't have any photos of it actually powered up at the moment, but I have it running a sous vide setup to verify that everything is working properly. Software has been ported to the new micro and basic temperature reporting over a USB virtual serial port works as well.

    Since my new micro does not have EEPROM, I need to rewrite my save/restore functionality to read and write from flash. Once I wrap that up along with some other tweaks, therm should be completely usable!

    I'll add photos of the updated design and links to source in the coming weeks.

  • Rev 0.2

    ethanzonca • 12/01/2014 at 21:52 • 0 comments

    The second revision of Therm is out for fabrication! I included breakaway mounting tabs and switched to a new (smaller) processor. More updates will come soon...

  • Up and running!

    ethanzonca • 09/22/2014 at 17:21 • 0 comments

    The first prototype therm board is up and running! I currently have it regulating the temperature on my espresso machine. Thermocouple readings seem much more stable than my last design based on the MAX6675, and a faster PID loop has greatly increased temperature stability at rest. I'll post some photos and more information soon.

View all 3 project logs

Enjoy this project?

Share

Discussions

Brandon Myles wrote 04/14/2020 at 08:43 • point

Hey Ethan do you still have this prototype available 

  Are you sure? yes | no

David H. wrote 03/06/2019 at 19:05 • point

There are commercially available STM32 based soldering iron controller with an OLED screen, rotary encoder and a beeper available for $30, surely the code can be adapted to run an espresso boiler instead. Someone reverse engineered and made this https://github.com/PTDreamer/stm32_soldering_iron_controller

  Are you sure? yes | no

Chauncey wrote 11/25/2018 at 06:05 • point

Could  you share your code with us? I want to learn more about this project.

Thank you.

  Are you sure? yes | no

Similar Projects

Turning the BeagleBone Black into a retro gaming appliance
Project Owner Contributor

Beagle Entertainment System

andrew-hendersonAndrew Henderson

Reflow oven controller
Project Owner Contributor

Reflow oven controller

lukasziwaszkiewiczlukasz.iwaszkiewicz

Miniature VT100 with all the bells and whistles
Project Owner Contributor

diy-VT100 - A Miniature hardware terminal

kuldeep-singh-dhakaKuldeep Singh Dhaka

New take on one of my earlier projects
Project Owner Contributor

EtherGeiger 2.0

marek-wicekMarek Więcek

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "therm", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.