BTLE 4.0 to 900Mhz Bridge

This is a development platform with a bluetooth radio, 900mhz radio, and connectivity options for peripherals, plus a few on board sensors.

Adam Schoenwald

Following Follow project

Liked Like project

Become a Hackaday.io member

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Similar projects worth following

Official Hackaday Prize Entry

View Gallery

Description

This is my Bluetooth 4.0 to 900Mhz mesh network bridge. Here is a quick summary of what it will do. I plan to use this design as a development platform. There is plenty of room for code, and potential applications are starting to pile up. Possible applications so far are home automation, weather stations, boat monitor (I don’t want any repeats of the early morning fishing trip turned mid scuttle shuffles), and proximity light controller.

Components

1 × nrf51822 Bluetooth Radio and Arm Processor
1 × cc1200 900 Mhz Serial Controlled Radio
1 × HTU21D Sensors / Temperature, Thermal
1 × MPL3115A2 Sensors / Pressure, Force
1 × ALS-PT19 Opto and Fiber Optic Semiconductors and ICs / Photo Transistors

Build Instructions

Collapse

1

Step 1

Get PCB's Fabricated
2

Step 2

Install Components (Reflow or Hand Solder
3

Step 3

Program with JLink, nrf51822 Dev Kit, or other ARM M0 flashing device.

View all 3 instructions

BTLE 4.0 to 900Mhz Bridge

Become a Hackaday.io member

Just one more thing

Description

Components

Build Instructions Collapse

Enjoy this project?

Discussions

Become a Hackaday.io Member

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member

Build Instructions

Collapse