0%

0%

Stepper Motor Mounting Bracket

An affordable stepper motor mounting bracket

wmacaluso

Following Follow project

Liked Like project

Become a Hackaday.io member

OR

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Similar projects worth following

467 views

Description

A simple and affordable mounting bracket for your NEMA-17 stepper motor. Feel free to print your own here: https://www.thingiverse.com/thing:2604085, or buy one from my store: https://www.avirdis.com/products/stepper-motor-mount-nema-17

Details

If you're going to print this, make sure you print in ABS! PLA can melt if the stepper become too hot.

Discussions

Florian Festi wrote 11/23/2017 at 22:43

I saw this and spontaneously stole the idea
http://www.festi.info/boxes.py/NemaMount

I don't even know why. Sorry!

Are you sure? yes | no

wmacaluso wrote 01/17/2018 at 20:29

no worries!

Are you sure? yes | no

Bharbour wrote 10/26/2017 at 19:37

That looks a lot like what I welded up out of 1/4" aluminum. Mine were for NEMA 23 motors though.

Are you sure? yes | no

Jarrett wrote 10/25/2017 at 18:00

A word of warning: I've had PLA stepper brackets melt on me.

Are you sure? yes | no

wmacaluso wrote 10/25/2017 at 18:06

Thanks! Just added to the details that it should be printed in ABS.

Are you sure? yes | no

Similar Projects

Stepper motors are found in many thrown out electronic devices. Here's how I got one up and running.

Reviving tossed stepper motors

Custom electromechanical motor that can be printed using any 3D printer, some coil, maybe magnets and a controller.

3D Printed Parametric Motor

I am replacing the motherboard of a Davinci mini maker with a ramps 1.4 and programming it with marlin.

XYZ Davinci Mini Maker Hack

An articulated motor mount for flexible shaft transmissions, to minimize bends and lateral efforts on your printer's head

FLEXTRUDER2 MM: flexible shaft motor mount

luc-job Luc JOB