Stepper Motor Mounting Bracket

An affordable stepper motor mounting bracket

Become a Hackaday.io member

To make the experience fit your profile, pick a username and tell us what interests you.

Similar projects worth following

467 views

A simple and affordable mounting bracket for your NEMA-17 stepper motor. Feel free to print your own here: https://www.thingiverse.com/thing:2604085, or buy one from my store: https://www.avirdis.com/products/stepper-motor-mount-nema-17

If you're going to print this, make sure you print in ABS! PLA can melt if the stepper become too hot.

Florian Festi wrote 11/23/2017 at 22:43

I saw this and spontaneously stole the idea
http://www.festi.info/boxes.py/NemaMount

I don't even know why. Sorry!

Are you sure? yes | no

wmacaluso wrote 01/17/2018 at 20:29

no worries!

Are you sure? yes | no

Bharbour wrote 10/26/2017 at 19:37

That looks a lot like what I welded up out of 1/4" aluminum. Mine were for NEMA 23 motors though.

Are you sure? yes | no

Jarrett wrote 10/25/2017 at 18:00

A word of warning: I've had PLA stepper brackets melt on me.

Are you sure? yes | no

wmacaluso wrote 10/25/2017 at 18:06

Thanks! Just added to the details that it should be printed in ABS.

Are you sure? yes | no