Close
0%
0%

ANAVI Light pHAT

Open source hardware add-on board for Raspberry Pi that controls RGB LED strip and collects data from various sensors through Home Assistant

leon-anaviLeon Anavi
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
232 views
1 comments
1 followers
View Gallery
ANAVI Light pHAT is an open source hardware, Raspberry Pi add-on board for controlling a 12 V RGB LED strip. Furthermore, the board supports sensors for light, temperature, humidity, gesture recognition, and motion detection. It features:* Terminal block for attaching 12 V RGB LED strip* Slots for up to three plug and play I2C sensor modules* Slot for PIR motion sensor* UART pins for debugging* EEPROM with board manufacturer information and a device tree fragmentANAVI Light pHAT is fully compliant with the popular open source home automation platform, Home Assistant. Thanks to ANAVI’s open source application, the ANAVI Light pHAT can be easily integrated into Home Assistant as an MQTT JSON Light component.ANAVI Light pHAT was designed using the free and open source application, KiCAD. You can support our crowdfunding campaign and order from Crowd Supply.

Enjoy this project?

Share

Discussions

tedmalonet62344 wrote 06/09/2023 at 10:34 • point

This project is very great for me i like this porject. i wish you will many more share project like this.  https://www.mybkexperience.onl/

  Are you sure? yes | no

Similar Projects

Open source experiment kit made with the AS7262 (six colors) and AS7263 (near infrared) spectral sensors and the Raspberry Pi
Project Owner Contributor

Homemade Spectrometer

guillermo-perez-guillenGuillermo Perez Guillen

It is a low-cost and simple lighting control system which can be used energy-saving lighting in the places such as passageway and road.
Project Owner Contributor

Light Sensor LED Brightness Control System

icstationicstation

Spectrophotometer To Determine Normalized Difference Vegetation Index (NDVI) Built With Raspberry Pi And NIR Spectral Sensor
Project Owner Contributor

Plant Foliage Health Monitor

guillermo-perez-guillenGuillermo Perez Guillen

The digital ambient light sensor is used to control the brightness of electronic devices according to the level of light in surroundings
Project Owner Contributor

Digital Light Sensor PCB Board based on OPT4001

arshmah-shahkarArshmah Shahkar

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "ANAVI Light pHAT", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.