Gears for Grandma's Mixer

Description

My grandma's old stand mixer got jammed up and finally broke. Inspection revealed three gears with broken teeth, of which two were identical. Using Fusion 360 and my trusty calipers, I recreated the gears. One of the gears was also the part that holds the beaters, so that took some iteration to get the right fit.

Unfortunately I didn't take any pictures at the time and the mixer is now gone, so I can only post images of the parts from Fusion 360. But it was something similar to this picture I found on google.

Files

Beater Gear v6.f3d fusion - 3.30 MB - 02/17/2018 at 15:29		Download
Gear 1 v3.f3d fusion - 1.49 MB - 02/17/2018 at 15:29		Download
Gear1.stl Standard Tesselated Geometry - 1006.14 kB - 01/18/2018 at 05:02		Download
beater_gear.stl Standard Tesselated Geometry - 800.86 kB - 01/18/2018 at 05:02		Download

Gears for Grandma's Mixer

Become a Hackaday.io member

Just one more thing

Description

Files

Beater Gear v6.f3d

Gear 1 v3.f3d

Gear1.stl

beater_gear.stl

Enjoy this project?

Discussions

Become a Hackaday.io Member

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member