Repairs You Can Print Contest | Hackaday.io

170 projects

3D print a replacement corner bracket for an Ikea Antonius Wire Frame Basket system.

IKEA Antonious Basket Frame corner repair

This project will attempt to record the production 3D printed molds, in this case for a glider landing-strut boot

Printing Molds for Rubber Repairs

classicrockfanatic88

My shower screen clip broke so I printed a replacement

Simple Shower Fix

andy-from-workshopshed Andy from Workshopshed

The 2018 Hackaday Prize

How a silly mistake led to a 3D printed part.

A stand for my multimeter again

matthias-kesenheimer Matthias Kesenheimer

Replacement case for PTX-4 type garage door remotes common in Australia. My case design incorporates flexible button keys.

Remote Control Case with Flexible Buttons

I was solving a Rubik's Cube when The corner piece broke! So I 3d printed the corner!

Rubik's Cube Corner Repair

ian-hunn Ian Hunn

A simple sleeve to use the gray-colored Ninja motor on (older?) black blades.

Ninja Blender Black to Gray Adapter

A 3D printable bracket to both support and hold a shelf in place.

Simple but Effective Shelf Retention Bracket

It's to hold your book open while reading

Book Holder

replacement of a part of a food processor by a 3d printed part

Repairing a food processor

matthieu-morel Matthieu MOREL

3D printed reinforcement for reducing the tissue wear, it works like a vise, redistributing the weight of the baby legs.

Foppapedretti stroller reinforcement

alessio-cavalieri Alessio Cavalieri

I made a extended hex bit socket because I thought that it will be useful to tighten nuts which are harder to reach

Extended hex bit socket

The need is real to replace the missing handle to the attic stairs!

Regain access to the attic staircase

After the original hood ornament star of our dear MB-E 220 has been ripped out yet again, I decided to create and 3d-print my own.

Cooler-Figur

A 3d printable replacement fuel cap, made as a repair for the original fuel cap that broke.

3d printable fuel cap for brush cutter

The 2018 Hackaday Prize

Here lies some 3D printable modifications for the generic CNC machines found on AliExpress like the 3018, 2418 or the 1610

CNC Mod Pack

brandon-piner Brandon Piner

This is a replacement window winder for a MK2 Ford Fiesta after the previous one snapped off.

MK2 Ford Fiesta Window Winder

Reviving a set of headphones with some CAD work and 3D printed parts

3D Printed Beats MIXR repair

Trysten Den Hartog

The 2018 Hackaday Prize

The broken part was no longer available since Pontiac is no longer in business.

Pontiac G6 Wing Support

sean-todd Sean Todd

Just some random bits and things and bits of things I have made to fix things, improve things and save a pile of money and effort.

General 3D Printed Fixes and Improvements

The 2018 Hackaday Prize

I 3D printed zippers to connect two REI mummy bags- a great way to cuddle with an SO while out camping!

3D Printed Zippers for Sleeping Bags

katie-g Katie G

How I converted my electric bike battery from Sealed Lead Acid (SLA) to Lithium Iron Phosphate (LiFePO4).

Electric Bike Battery SLA to LiFePO4 Conversion

lucas-rangit-magasweran Lucas Rangit MAGASWERAN

Repairs you can print. Prevent dehumidifier buttons from damaging the circuit board.

When circuit bending isn't cool.

adwiebe adwiebe

B