Quantity   Component name
1 × Plywood 1/2" thick, 4'x4'
1 × Skateboard Deck 30"+
1 × Shower Liner Peva is the best I've found so far but still need to test some of the heavier guage vinyl
2 × Coffee Can Lids Other lids work too, size depends on disc size. Just make sure it's thin enough to staple through.
1 × Gaffers Tape Not always available at hardware stores. I used Rock N Roll Rentals in ATX
1 × Gorilla Tape Used for reinforcing skirt holes and great for repairing small tears.
1 × Scissors/Blade Just scissors and a sharp edge. Exacto works fine.
1 × Hanger Tape You'll need less than 10 feet.
4 × Black & Decker 20V Lithium Ion Leafblowers I got mine cheaper on amazon because they were refurbished, but Lowe's typically stocks these. You'd be lucky to find all 4 at one store though. I'd be tempted to try the 40V version, but also ready to move to something more proprietary instead of further exploring a llimited component.
1 × Tape Measurer
1 × Sand Paper/Sander
1 × Staple Gun
1 × Jigsaw
1 × 2 1/2" Hole Saw
8 × ~3/4" Screws Depends on how thick the skateboard is.
8 × Corner Braces
8 × 1/2" Nut and Bolt
16 × 1/2" Screws
200 × 1/4" Staples