Back to overview
A printable robot arm, a little bigger than the usual hobby servo once.
Print all parts and assemble them ;)
Create an account to leave a comment. Already have an account? Log In.
These guys carry a few robotic arms as well. https://pinshape.com/items/9348-3d-printed-padestal-for-robot-arm - Better get it quick because I heard Pinshape is shutting down or something.
Are you sure? yes | no
hey there no stl files there
its say this
Stl files I've allready printed.
where do i get the stl file to print this thank you or how much to buy one like this ver 4 pls
i900032@gmail.com
Thnak you
stl files are on github (link is on the main page) upload them to at 3dhubs.com and it will tell you the cost to get them printed near you.
Andreas Hoelldorfer
Discussions
Become a Hackaday.io Member
Create an account to leave a comment. Already have an account? Log In.
These guys carry a few robotic arms as well. https://pinshape.com/items/9348-3d-printed-padestal-for-robot-arm - Better get it quick because I heard Pinshape is shutting down or something.
Are you sure? yes | no
hey there no stl files there
its say this
Stl files I've allready printed.
Are you sure? yes | no
where do i get the stl file to print this thank you or how much to buy one like this ver 4 pls
i900032@gmail.com
Thnak you
Are you sure? yes | no
stl files are on github (link is on the main page) upload them to at 3dhubs.com and it will tell you the cost to get them printed near you.
Are you sure? yes | no