Close
0%
0%

Foppapedretti stroller reinforcement

3D printed reinforcement for reducing the tissue wear, it works like a vise, redistributing the weight of the baby legs.

alessio-cavalieriAlessio Cavalieri
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
148 views
0 comments
0 followers
View Gallery
I had a problem, in the stroller in my possession several times I had to sew the lower part of the leg holders tissue, because it is worn and torn.

I designed this reinforcement to remedy the problem.

The reinforcement it works like a vise, redistributing the weight of the baby legs between upper (thicker) and lower tissue (thinner).

The sources in FreeCAD format are available.

Resources

rinforzo_passeggino_foppa_pedretti.stl

Reinforcement STL

sla - 990.71 kB - 01/27/2018 at 00:35

Download

rinforzo_passeggino_foppa_pedretti.fcstd

Reinforcement FreeCAD source

x-extension-fcstd - 161.93 kB - 01/27/2018 at 00:35

Download

  • 2 × 3D printed reinforcement
  • 6 × M3X20 screw With allen rounded head
  • 12 × Washer for M3 screw

  • 1
    Print two reinforcement

    Print the STL exactly as it appears, vertically. Add 10 mm brim for better stability during print.

  • 2
    Mark the holes

    Remove the legs holder tissue from holder tubes, using the printed reinforcement as a template and mark the holes on legs holder tubes using a permanent marker (upper side only)

  • 3
    Drill the holes

    Drill the holes on marked dot with a 4 mm drill bit (it's designed for use with M3 screws)

View all 7 instructions

Enjoy this project?

Share

Discussions

Does this project spark your interest?

Become a member to follow this project and never miss any updates

By using our website and services, you expressly agree to the placement of our performance, functionality, and advertising cookies. Learn More

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "Foppapedretti stroller reinforcement", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.