Quantity   Component name
6 × IN-14 Neon gas based digital display Nixie Tube.
5 × Neon Bulb Will be used as Decimal Points between each of the Nixie Tubes.
1 × K155ID1 This is the Nixie Driver IC. It can take a minimum of 2v for logic 'high', and switch the 170v needed for the Nixies.
1 × HV Module v1 [PV Electronics] Takes in 12v and boosts to 170v.
6 × IN-14 Tube Cell v2 A break-out board for IN-14 Nixie Tubes.
6 × 2x6 Pin Header Used with the Tube Cell
6 × 2x6 Pin Socket Used with the Tube Cell
11 × MPSA42 NPN MOSFETs used to switch the Nixie Tubes and Neon Lamps
6 × MPSA92 PNP MOSFETs used to switch the Nixie Tubes
1 × Raspberry Pi 2
1 × Adafruit Perma-Proto HAT
1 × 16x2 LCD Display