Can be used as small CPLD development kit, or USB Interface: JTAG, UART, SPI, etc...
Already have an account? Log in.
To make the experience fit your profile, pick a username and tell us what interests you.
FT2232H + Lattice XO2-256 CPLD + Pin-header with 8 user defined I/O pins.
1) use as mini developmen kit, JTAG to onboard CPLD is recognized by Lattice Diamond tools
2) use as standalone CPLD module, with 8 I/O
3) use as USB to X + Y Interface, X or Y can be: JTAG, SPI, UART, I2C, etc..
PCB Rev 1 production was success, there are one or to "enhancements" planned for rev 2. Rev 1 boards are ready and in active use, and can be ordered now.
Basic configuration files for the CPLD are also done, but there is more work needed to add more interfaces, also documentation should be enhanced also.
This is your one-week reminder to upload design documents: https://hackaday.io/project/7813-the-square-inch-project/log/28566-design-deadline
Antti Lukats
Simon Merrett
Emma
danjovic
You haven't uploaded any design files yet—we need them until 23:59 UTC on Dec 8, 2015.