Antti Lukats-
Magnetic I/O Test
08/30/2015 at 11:13 • 0 commentsusing stuff from "grab box", here is video:
![]()
using 3 magnets per contact
![]()
Two magnets per contact.
Use of 3mm Screws is also possible.
Recommended PCB thickness 1.6mm, hole size 3mm.
using stuff from "grab box", here is video:
using 3 magnets per contact
Two magnets per contact.
Use of 3mm Screws is also possible.
Recommended PCB thickness 1.6mm, hole size 3mm.
