If you'd like to enter, please post a link to your project's page as a comment on this project log!

Some reminders:
You don't need to have your PCB's schematics or circuit design finished to enter.
Each user can enter up to 10 PCBs. [One PCB per project.]
Your PCB can be smaller than 1x1".

Entered projects are listed here:

https://hackaday.io/list/7909-square-inch-project-entrants

ENTRIES ARE CLOSED.

Discussions

femtoduino wrote 09/30/2015 at 00:32

May I submit the FemtoBeacon to this contest? ARM powered, has USB, Zigbee + Mesh, and 9DOF + Altimeter/Temp IMU

...currently 18.5mm diameter though.

https://hackaday.io/project/5823-femtobeacon

Are you sure? yes | no

alpha_ninja wrote 09/30/2015 at 01:05

18.5mm (= 0.73 in) diameter is fine, not sure what the problem is... Anyway, I'm adding you!

Are you sure? yes | no

femtoduino wrote 09/30/2015 at 01:08

Heh...thought it had to be exactly 1 inch squared. :-)

Are you sure? yes | no

alpha_ninja wrote 09/30/2015 at 01:10

Nope, as the rules say, it just has to fit within a 1 in^2 square :)

Are you sure? yes | no

Jeremy g. wrote 09/29/2015 at 22:40

I will be cross posting on my blog www.weistekengineering.com and hackaday.io with my micro numitron clock. Id like to enter it as well to the 1"x1" contest. https://hackaday.io/project/7881-micro-diy-lipo-retro-numitron-clock

Are you sure? yes | no

alpha_ninja wrote 09/30/2015 at 00:07

You've been added!

Are you sure? yes | no

Jeremy g. wrote 09/30/2015 at 03:08

Thank you. :)

Are you sure? yes | no

Alex wrote 09/29/2015 at 14:32

I'd like to enter with my #tiny7 project.

Are you sure? yes | no

alpha_ninja wrote 09/29/2015 at 17:06

You're in!

Are you sure? yes | no

Alex wrote 09/29/2015 at 17:34

Thanks!

Are you sure? yes | no

deʃhipu wrote 09/29/2015 at 07:17

I'd like to enter my project, #Nyan Board.

Are you sure? yes | no

alpha_ninja wrote 09/29/2015 at 13:52

Done!

Are you sure? yes | no

Nick Sayer wrote 09/29/2015 at 04:25

I don't have it as a Hackaday.io project (yet), but there's my "tiny blinky" that I was making during the last Maker Faire: https://www.tindie.com/products/nsayer/tiny-blinky/

Are you sure? yes | no

alpha_ninja wrote 09/29/2015 at 13:53

Sweet, please let me know when you've made the project page! :D

Are you sure? yes | no

Nick Sayer wrote 10/12/2015 at 04:53

Ok, here it is:

https://hackaday.io/project/8032-tiny-blinky

Are you sure? yes | no

alpha_ninja wrote 10/12/2015 at 13:06

Added!

Are you sure? yes | no

Enter here!

ENTRIES ARE CLOSED.

How to Enter

The Two-Week Mark

Discussions

Become a Hackaday.io Member