This project is aMicroUSB powered ESP8266 Oled Display. It can be used to display Weather Information or Wifi SSID Information.
Already have an account? Log in.
To make the experience fit your profile, pick a username and tell us what interests you.
The PCB Design was created using Altium Designer. Manufacturing documents along with the Schematic and Components used are all located here: https://github.com/mike-rankin/ESP8266_OLED_Display
A video of it running three different sketches can be found here:
The parts count is pretty low since it consists or a MicroUSB connector, 3.3v LDO, ESP-01 and a SSD1306 white Oled display. Pictures of me assembling on is at: https://0miker0.wordpress.com/microusb-powered-esp8266-oled-board/
The BOM is on the last page of the PDF. Page 1=Schematic, Page 2=Placement Map. Page 3=BOM
Hi miker - very nice project! Could you give a source for the OLED display? I can find a lot of "Arduino compatible" ones with headers, but not having much luck with the ribbon cable version you have. Thanks in advance :)
Hey Gus. The complete parts list is provided in the pdf along with the schematic, parts map, code. It's all provided in my github link.
Ah, nice - didn't go far enough through the PDF. RTFM! Thanks!
0miker0
Alex
4D Makers
Tahmid
Tony E. Nazzal
Hey there,
looks like your BOM is missing. You can just put it into the project components, and you need to upload it by 23:59 EST on Tuesday, Dec 8!