Quantity   Component name
1 × Teensy 3.2 - Arduino Compatible 32 bit Microcontroller Board (pre-loaded with workshop hardware test sketch) http://www.pjrc.com/store/teensy32.html
1 × Audio Shield - SGTL5000 Codec Chip http://www.pjrc.com/store/teensy3_audio.html
1 × Washer (under microphone) Custom laser cut from 1/8 inch acrylic
1 × (optional) Headphones Panasonic RP-HT21
1 × Wire, #22 solid, tin plated Digikey C2004W-1000-ND
1 × Micro SD Card, 8 GB (pre-loaded with workshop files) files available here: http://www.pjrc.com/teensy/td_libs_AudioDataFiles.html
1 × Micro to standard size SD adaptor
1 × SD card reader, USB 2.0
1 × USB 2.0 Cable, A to Micro-B, 18 inch
1 × TFT Display, 320x240, ILI9341, 2.2 inch http://www.pjrc.com/store/display_ili9341.html
5 × extra breadboard wires orange, green, purple, greay, brown - approx 8 inches
15 × breadboard wires, bare tin-plated #22 wire, bent 0.4 or 0.3 inch these connect 3.3V and GND
2 × Header Pins, 14 positions, 0.1 inch pitch, double insulator http://www.pjrc.com/store/header_14x1_d.html
1 × Headphones, Panasonic RP-HT21 https://www.amazon.com/dp/B00004T8R2
1 × Breadboard - Standard 830 tie-point size http://www.busboard.com/BB830
3 × Pushbutton E-Switch TL59FF160Q - Digikey EG4566CT-ND
1 × Thumbwheel Trim Pot, 25K <-- update: not used by any workshop examples Bourns 3352T-1-253LF, Digikey 3352T-253LF-ND
2 × Pot, 10K Bourns PTV09A-4020U-B103, Digikey PTV09A-4020U-B103-ND
2 × Pot Adaptor Board https://www.oshpark.com/shared_projects/P38N77nS
1 × Microphone PUI Audio AOM-6738P-R, Digikey 668-1296-ND
1 × SPI Flash Memory, 8 MByte <-- update: not used by any workshop examples Winbond W25Q64FVSSIG, Digikey W25Q64FVSSIG-ND