AlphaNumDisp

Details

Inspired by this did started to think about small alphanumeric displays. Most of them are old and obsolete and because of that quite expensive. But you can get more modern 14 segment LED displays. I decided to use six digit one like this:
(Image by seedstudio)

For controlling this I decided to develop a PCB which does have the same size as the display. For controlling this I will use an ATmega8, a MAX6971 16 channel led driver and some p-channel mosfets. First I will use it as a stand alone thing, but the PCB hast connection for i2c and uart, so this could be also the display for something else.

Here a picture of the PCB design:

I did sent this PCB to osh-park. And got them delivered as you can see in the next picture:

I did also soldered one. I do not know weather they are working, because I did not code any software yet. This and probably some hardware debuggnig will be the next step. More information and progess will come soon.

Files

display_ledMisc.lbr

Eagle Lib for the segment display used

lbr - 9.88 kB - 03/17/2018 at 14:20

Download

Project Logs

Collapse

Serial inout now working
Alex • 02/01/2016 at 16:55 • 1 comment
So after the basic firmware which I did first for testing, I did now expand that a bit. Now characters received over the the UART interface are shown on the display. The characters a decoded as normal ASCII characters. After some trouble this is also working stable. Thinks that gone wrong:
- Using the TX line as a digit output was not a good idea. I do have even PINs left over.
- UART on a AVR does not work good with the internal oscillator. So I had to solder a resonator on the PCB (footprint was available)
Some ideas for a next revision:
- Do not use TX for segment.
- Make TX accessible from the side to chain displays
So here is a picture showing some test letters. The board in the front is a normal USB to UART converter.
The characters sent here are:
```
Test#7
```
One good thing about using the serial interface is that you get a display which is compatible to a huge number of devices.
I did also add a link to bitbucket repository. There you can find the early firmware version of today.
HelloW(orld)
Alex • 01/31/2016 at 14:28 • 3 comments

Here is a first image of a working display. The software is not ready yet. There is still a lot to do. The test firmware used for this picture can just show this HelloW(orld) example and nothing more.

View all 2 project logs

Discussions

deʃhipu wrote 02/01/2016 at 15:31

What's the gray thing around the edge of the PCB?

Are you sure? yes | no

Alex wrote 02/01/2016 at 15:46

I not sure what you mean. But there is white silkscreen frame on top (side with the ICs). This frame is mostly to hide the pruple PCB on top side.

Are you sure? yes | no

deʃhipu wrote 02/01/2016 at 15:47

Ah, I see. That's it, thanks.

Are you sure? yes | no

danjovic wrote 01/31/2016 at 23:34

Amazing! Congratulations for the build. Just loved the PCB!

Are you sure? yes | no

Alex wrote 02/01/2016 at 14:10

Thanks!

Are you sure? yes | no

jaromir.sukuba wrote 01/31/2016 at 18:48

The display module looks sweet. What is that? I tried to search for JM-S03961BH-001 but no avail.

Are you sure? yes | no

davedarko wrote 01/31/2016 at 19:00

I thought I found them cheaper, but when I've talked with al1 it was one of these: http://www.aliexpress.com/item/Six-Alphanumeric-14-Segment-LED-Red-LED-display-module/32469096265.html?spm=2114.01010208.3.155.GqZyMJ&ws_ab_test=searchweb201556_9,searchweb201644_3_505_506_503_504_502_10001_10002_10016_10005_10006_10003_10004,searchweb2015...

Are you sure? yes | no

jaromir.sukuba wrote 01/31/2016 at 19:35

Oh crap, the shipping is way too high and the modules itself aren't cheap either. There aren't much sellers of this display, so I'll probably wait a bit until it gets cheaper.

Are you sure? yes | no

Alex wrote 01/31/2016 at 19:48

Thanks!

I did pay 2.6US$ each and the same for shipping. I did bought them here:
http://www.aliexpress.com/item/Six-Alphanumeric-14-Segment-LED-Red-common-anode/32319856281.html

But they are no more available. This could be because of chinese new year next week.
This should be also the same display:
http://www.seeedstudio.com/depot/Six-Alphanumeric-14-Segment-LED-Red-p-1990.html

Are you sure? yes | no

jaromir.sukuba wrote 01/31/2016 at 19:49

Oh, that's much better, thank you!

Are you sure? yes | no

davedarko wrote 02/01/2016 at 09:01

Right, seeedstudio was the link... damn. But the picture is exactly the same, maybe that's what confused me!

Are you sure? yes | no

davedarko wrote 12/21/2015 at 18:53

woahhhh. By the way I got some more of these displays :)

Are you sure? yes | no

AlphaNumDisp

Description

Details

Files

display_ledMisc.lbr

Project Logs

Collapse

Serial inout now working

HelloW(orld)

Discussions

Similar Projects

SSD1325 OLED Hack

Paperino

LaunchPad 3x7-Segment Display Booster Pack

31 Segments RGB Cistercian Display

AlphaNumDisp

Become a Hackaday.io member

Just one more thing

Description

Details

Files

display_ledMisc.lbr

Project Logs Collapse

Serial inout now working

HelloW(orld)

Enjoy this project?

Discussions

Become a Hackaday.io Member

Similar Projects

SSD1325 OLED Hack

Paperino

LaunchPad 3x7-Segment Display Booster Pack

31 Segments RGB Cistercian Display

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member

Project Logs

Collapse