Quantity   Component name
2 × 3m Sections of 20mm x 20mm x 2.5mm Steel Box Section For the frame - Considered Aluminum but due to the complexity and my limited experience with a welder i decided upon steel for the prototype
1 × 500mm x 500mm x 3mm Steel Plate For making the mounts and Gears
1 × 2.4Ghz 6Ch Tx & Rx V2 Radio A cheap 6 channel Radio that i bought for testing purposes of all my RC projects (this is very likely to change in the later stages)
2 × Ford Fiesta Mk4 Wiper Motor Windscreen wiper motor from a Ford Fiesta Mk 4
1 × Sabertooth 25A duel V2 Speed Controller A duel channel speed controller with a lot to offer
4 × Foam Wheel 2.5 Inch diameter wheel