A motherboard to rule them all

A project log for Murgen: open source ultrasound imaging

An open-source ultrasound imaging dev kit side project

kelu124 • 03/19/2017 at 22:57•2 Comments

I wanted to have a small board to connect the different modules.. and make room for two Raspberry headers (one for a raspberry, the other for a cape... say a 20Msps ADC =) ) - especially now that I have this wonderful pi W to play with!

It'll look like something like...

at https://oshpark.com/shared_projects/2taE6p4M !

Previous log

Business intelligene on handheld ultrasound probes

01/16/2017 at 21:15 • 0 comments

Next log

Doing a high-speed ADC for Raspberry Pi

03/20/2017 at 22:05 • 0 comments

Discussions

kelu124 wrote 03/20/2017 at 21:55

Thanks =) Maybe an overkill, but I wanted something clean and tidy to hold the set of modules.

Are you sure? yes | no

oshpark wrote 03/20/2017 at 21:18

impressive!

Are you sure? yes | no

A motherboard to rule them all

Business intelligene on handheld ultrasound probes

Doing a high-speed ADC for Raspberry Pi

Discussions

Become a Hackaday.io Member