ConfigurablePulledSwitch.jpg

Just need to take this and set it up for a few switches on a single board and possible an enclosure or frame to mount the board to.

JPEG Image - 8.91 kB - 04/14/2016 at 02:36

Preview

PotentiometerBottom.JPG

The bottom view of my 10K linear potentiometer board.

JPEG Image - 333.45 kB - 03/09/2016 at 01:47

Preview

RadioShackMiniBreadBoard.pcb

This is the basic layout for the Radio Shack Prototype PCB cat # 276 - 0150 for ExpressPCB

pcb - 13.75 kB - 01/27/2016 at 03:45

Download

LED - Bench Accessory 002.pcb

This is the RED LED layout side of the breadboard extender. Use in ExpressPCB

pcb - 21.20 kB - 01/27/2016 at 03:45

Download

PullUp_PullDown_switches.pcb

This is the layout for the switch breadboard extender. Use in ExpressPCB

pcb - 22.78 kB - 01/27/2016 at 03:45

Download

LED - Bench Accessory.pcb

This layout shows both sets of the LEDs on the LED breadboard extender. Use in ExpressPCB

pcb - 13.01 kB - 01/27/2016 at 03:45

Download

12 MM micro switch - on back layout.p

This is a custom component used in Express PCB

Pascal Source File - 320.00 bytes - 01/27/2016 at 03:43

Download

Wire Pin - Female.p

This is a custom component used in Express PCB

Pascal Source File - 133.00 bytes - 01/27/2016 at 03:43

Download