Quantity   Component name
1 × Raspberry Pi Zero W(H) The brainz
1 × L298 Dual H-Bridge Motor Driver (ITEAD Studio Edition) The muscles, need it to drive the motors
1 × Micro SD Card At least 4 GB size, UHS-I (Class 10) speed is recommended.
5 × 10 or 20 cm Cable with Dupont Connectors - Female to Female Need them to connect the brainz to the muscles. One of them can be M-F, but F-F will work just fine too.
1 × Spare USB Cable The one you dont need any more. Coz, you'll have to cut it open and rip it apart!
5 × Cable with Dupont Connectors - Female to Female They connect the brainz to the muscles. One can be M-F but F-F will work just fine too.
1 × ULTRON Real Power PB6k, 6000mAh Juice canister, can't do without it. Comes with USB to Micro USB cable - we'll need this one!
2 × Right Angle Geared DC Motor Your common robot car DC motor. Yes, the yellow one.
2 × Wheel for the DC Motor Yes, yes, the yellow one (with black tire, of course)
1 × Wide Angle (Fish Eye) Camera Module for Raspberry Pi The Eye. One and only. Wider angle lets you see more, but the image is... well, a little bit distorted :-(
1 × Raspberry Pi Zero Adapter Cable for Camera Module Most camera modules for RPi come with standard cable. You'll need this one to make it work on Zero
1 × 3D Printed Parts Chassis, adapters, mount plates and so on... We're working on it...