PiBidar - Pi Bicycle Radar

A Raspberry Pi powered Radar for bicycles

Mitchell Wong Ho

Following Follow project

Liked Like project

Become a Hackaday.io member

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Similar projects worth following

7.4k views

1 comments

39 followers

22 likes

Description
Details
Files 0
Components 0
Logs 1
- View all
Instructions 0
Discussion 1

The 2016 Hackaday Prize

View Gallery

Description

According to ROSPA (The Royal Society for the Prevention of Accidents), 21,287 cyclists were injured in reported road accidents (in 2014)*. The report goes on to say "The most common vehicle involved in collisions with cyclists is a car or taxi, with the rider usually being hit by the front of the vehicle. In a quarter of fatal cyclist accidents, the front of the vehicle hit the rear of the bicycle."

Having a radar on the bike is a way that may assist riders and motorist avoid each other. There is at least one commercial product available, the Garmin Varia (https://buy.garmin.com/en-US/US/into-sports/cycling/varia-rearview-radar/prod518151.html).

This project is an attempt to hack a bike radar together using a doppler Radar HB100 and a Raspberry Pi (zero/3) or CHIP or Arduino.

*

Project Logs

Collapse

HERE 360 Bike Navigation
Mitchell Wong Ho • 03/23/2016 at 18:33 • 0 comments

I found this interesting open source/hardware project by HERE 360 (the mobile navigation folk).
This would be a neat extension to this radar project.