bottom.scad

Bottom case with a few changes for jack output, removing amplifier and adding support for TFT screen.

x-openscad - 1.83 kB - 04/02/2016 at 17:44

Download

bottom.stl

Bottom case with a few changes for jack output, removing amplifier and adding support for TFT screen.

sla - 2.89 MB - 04/02/2016 at 17:43

Download

pgp-top.stl

Initial case from http://www.thingiverse.com/thing:807591

sla - 1.13 MB - 03/23/2016 at 06:55

Download

pgp-bot.stl

Initial case from http://www.thingiverse.com/thing:807591

sla - 963.27 kB - 03/23/2016 at 06:55

Download

PiTFT-Buttons.stl

From http://www.thingiverse.com/thing:807591
PiTFT buttons to be printed in in Ninjaflex only !

sla - 409.85 kB - 03/20/2016 at 10:51

Download

hard-btn.stl

From http://www.thingiverse.com/thing:807591
A/B buttons to be printed in ABS/PLA.

sla - 119.71 kB - 03/20/2016 at 10:49

Download

perma-ab-buttons.stl

From http://www.thingiverse.com/thing:807591
A/B buttons to be printed in in Ninjaflex.

sla - 288.17 kB - 03/07/2016 at 22:09

Download

top.stl

Top case with a few changes for the Raspberry Pi Zero and removing speaker.

application/sla - 6.56 MB - 03/08/2016 at 07:39

Download

dpad.stl

From http://www.thingiverse.com/thing:807591
dpad, can be printed in PLA/ABS or Ninjaflex.

sla - 558.19 kB - 02/12/2016 at 21:41

Download

top.scad

Top case with a few changes for the Raspberry Pi Zero and removing speaker.

application/x-openscad - 1.08 kB - 03/07/2016 at 22:09

Download