Close
0%
0%

Wifi101 Neopixel Throwie

A WiFi enabled Neopixel Display

Similar projects worth following
Wifi101-MKR1000/Zero Neopixel Throwie

Basically what the title says. A few rough edges left to smooth out and perhaps adding a color wheel. Code was adapted from a few sources, but mostly my own work originally intended for an ESP8266 device.

Needed a few mods to the code as the libraries were completely different and as the Wifi101 has no SD reader (the ESP8266-12E can hold 3 megs or so) the whole site is in the code (very messy with long strings of HTML).

Planning on possible update with a color picker which was in the original ESP8266 code. With the added space it could host jquery/js files.

MKR1000_Neopixel_Throwie.JPG

Picture of circuit on breadboard

JPEG Image - 1.56 MB - 02/26/2016 at 14:16

Preview

MKR1000_Neopixel_Throwie_SS.PNG

Screenshot of HTML on iPhone

Portable Network Graphics (PNG) - 73.99 kB - 02/26/2016 at 14:16

Preview

WiFi101_AP_Neopixels.rar

Sketch files. Libraries needed should be available on Arduino Boards manager

x-rar-compressed - 8.43 kB - 02/25/2016 at 15:53

Download

  • 1 × MKR1000
  • 1 × Neopixels
  • 1 × 1000uF Cap
  • 1 × 470 ohm resistor
  • 1 × Old Li-ion mobile phone battery

View all 7 components

  • 1
    Step 1

    Download Wifi101 and neopixel libraries

  • 2
    Step 2

    Upload Code

  • 3
    Step 3

    Put cap between Voltage and Gnd

View all 6 instructions

Enjoy this project?

Share

Discussions

jacob.songlines wrote 01/22/2022 at 11:24 point

Dear, we have a job for a programmer. Creating patterns for adressable ledstrips and lighting. Are you interested? Please send mail to jacob@songlines.be

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates