Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects Dante Kienigiel likes and follows

16.5k
8.5k
68
We've connected our entire apartment, DIY style.
Project Owner Contributor

Practical Home Automation

fabricateioFabricate.IO

14.3k
8.2k
50
Small USB unit which simulates keyboard and generates, keeps and types up to eight passwords
Project Owner Contributor

Hardware password manager

voja-antonicVoja Antonic

4.9k
4.9k
18
Open automation system, starting with lights and occupancy sensing and expanding to encompass anything that has wires or electrical contacts
Project Owner Contributor

Home Automation System (to rule them all!)

the-hatThe Hat

39.1k
4.4k
307
Build your own nervous system!
Project Owner Contributor

NeuroBytes

zakqwyzakqwy

19.8k
4.3k
164
Measure brain activity with light
Project Owner Contributor

fNIR Brain Imager

jeremy-ruhlandJeremy Ruhland

16k
3.7k
69
Development of a robust low cost 3D printed hand prosthesis using off-the-shelf components.
Project Owner Contributor

biohand - Low cost 3D printed hand prosthesis

martin-vincent-bloedornMartin Vincent Bloedorn

15k
2.9k
59
75x40 mm, 6 layer PCB, Xilinx XC7Z7010 FPGA, dual core ARM Cortex-A9, 32Mbyte Flash, SD, microSD, Bluetooth, 100 mil headers, single 3.3V
Project Owner Contributor

Open Source HW: Xilinx ZYNQ7000 System on Module

antti-lukatsAntti Lukats

329.8k
2.8k
1.7k
A printable robot arm, a little bigger than the usual hobby servo once.
Project Owner Contributor

3D Printable Robot Arm

andreas-hoelldorferAndreas Hoelldorfer

1.1k
2.7k
15
Reliving the age of BBSing in the 21st century.
Project Owner Contributor

Cheap BBS server

berkeley-goodloeBerkeley Goodloe

3.6k
2.4k
22
Goal: Create a syringe pump to feed material to the Moineau Extruder or the Oogoo Mixer.
Project Owner Contributor

Syringe Pump

doctekdoctek

1.6k
2.2k
7
Project Owner Contributor

OpenDAC HD

mike-luMike Lu

28.1k
1.8k
175
Affordable, light-weight, anthropomorphic prosthetic hands, using a novel selectively-lockable differential mechanism.
Project Owner Contributor

OpenBionics Affordable Prosthetic Hands

openbionicsOpenBionics

1.7k
5
A 3d printed socket that will allow for on-location calibration of replacement arms.
Project Owner Contributor

Calibrated Prosthetic Socket for 3D Printed Arms

daniel-r-duganDaniel R. Dugan

950
1.3k
10
Recreate technology from the past with 3D printing.
Project Owner Contributor

Reviving the Cars of the Past with 3D Printing

arin-panaitArin Panait

628
1.3k
5
3D printing in a vacuum at high speeds
Project Owner Contributor

Scanning 3D High Velocity Vacuum Printer

chazChaz

3k
1.3k
18
Build a robotic arm which will be controlled with an Android phone via the Audio Jack.
Project Owner Contributor

Build an Android-controlled robotic arm

melvin-zammitmelvin zammit

309
1.3k
1
Created a shelf for my 3D printer with ambient and printing bed lights.
Project Owner Contributor

Shelf for 3D-printer

timo-hyvnenTimo Hyvönen

7.5k
951
98
We are using 3D scanning, 3D modelling, and 3D printing to create high functioning but LOW-COST bionic prosthetic hands for amputees.
Project Owner Contributor

Affordable Bionic Hands For Amputees

open-bionicsOpen Bionics

11.3k
897
84
A 3D printed, cast-aluminum, anatomy-based, Arduino controlled bionic arm that surpasses the human arm in functionality and feel.
Project Owner Contributor

NeoLimb

amadon-faulAmadon Faul

8k
671
64
A tiny programmable WiFi enabled micro controller board
Project Owner Contributor

WiFi Drop

andreas-auerAndreas Auer

1.2k
19
4
Re-arm is a prosthetic hand that is controlled using voice commands through android application, with different modes and features.
Project Owner Contributor

RE-ARM

yashgajra56yash.gajra56

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday