Projects tony.fountaine likes and follows

Sort by:

An Arduino controlled infinity mirror mask. You can even see while wearing it!

Infinity Mirror Scuba Mask

curt-white Curt White

My attempt to build a desktop arcade machine by 3D printing the cabinet and using Raspberry Pi 3 running RetroPie.

Desktop Arcade Machine : 3D Printed + RetroPie

christopher-tan Christopher Tan

A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework

Super atari 6502 (A "DIY" 2600 hardware clone...)

I rebuilt my Passap E6000 knitting machine so that I can now control not only the front but also the rear needle bed.

Passap E6000 rebuilt and replaced console

irene-wolf Irene Wolf

The 2018 Hackaday Prize

A low-cost STM32 board with motor controllers created along with visual programming and control software for use in education.

Visual Robotics Platform

A project to activate a remote control for a garage via smart phone using an esp8266 module, a pair of relays and some cloud services.

esp8266 internet controlled relay (garage opener)

alexander-else Alexander Else

Allows encrypted communication between two RF serial bridge modems of up to 40km distance LOS

two way text/command communication using RFD 900X

A sleeker case for the bulky BMW proximity key fob.

3D print a thinner car key

The 2018 Hackaday Prize

Flip-Flop design with just one transistor. Nice for transistor-CPU's ! The principle can also be used for vacuum tube flipflops.

One Transistor FlipFlop

Use your Raspberry Pi to "convert" your WiFi connection to wired. Use your old router as access point with Ad-Blocking.

Raspberry Pi route WiFi through Ethernet

Dimitris Matsoukas

The 2018 Hackaday Prize

Modular Synths are expensive and complicated. I propose a low-cost, entry-level/educational system to make the basics available to anyone.

SynBlox : Low Cost Modular Music Synthesizer

john-schuch John Schuch

This article summarizes how to connect your ESP32 WiFi module to the AskSensors IoT cloud

How to connect ESP32 to the IoT cloud

The 2017 Hackaday Prize

This is a easy-to-build Segway with Arduino Nano.

Arduino Segway

vincius-jean-ferreira Vinícius Jean Ferreira

An Arduino based project that can turn off led by blowing on it (uses Microphone Sound Sensor module).

Arduino Birthday Candle

amal-mathew Amal Mathew

Open Source Hardware for IoT Embedded Applications

nRF52832 Micro Development Kit

boktech BokTech

Save Lithium-Ion battery!

Battery ( Li-Ion ) care

This is a L298 motor driver from Open-Electronics.org and a BeagleBone Black with Python software

BeagleBone Black and a L298 Motor Driver

A small breadboard compatible byte made of LED's.

LED Byte

miguel-reis Miguel Reis

The 2017 Hackaday Prize

Added features Like music stream, customizable greeting, camera selfie.

Smart Mirror

shubham-khatri shubham khatri

This is a Flask application in Python w/ some HTML to control two, DC motors in forward, left, right, stop, and reverse...

MotorCape and BeagleBone Black Wireless

This project presents an analysis of the performance of the Preempt-RT Patched Kernel (4.14.y-rt) running on a Raspberry Pi 3 Model B & B+

Real-time Kernel (Preempt-RT) for Raspberry Pi

mauro-riva Mauro Riva