Projects Boxerbomb likes and follows

Sort by:

Some AVR assembler in a GCC program can speed up execution, particularly interrupt service routines.

AVR GCC assembler techniques

bruce-land Bruce Land

The 2017 Hackaday Prize

Probability this can work: 98%, working well: 50% A LOT of work, and utterly ridiculous.

Improbable AVR -> 8088 substitution for PC/XT

eric-hertz Eric Hertz

The 2017 Hackaday Prize

My goal is a 4-bit CPU using recycled cardboard substrate and Diode Transistor Logic. This is an educational platform for me.

The Cardboard Computer - IO is my name

dr-cockroach Dr. Cockroach

Official Hackaday Prize Entry

An 8-bit computer based around an AVR ATMega-644 and junk-box SRAM.

Cat-644

A minified replica of the Apple 1 computer

Apple 1 Mini

ruud-van-falier Ruud van Falier

Each custom CPU is a stack machine. Parallel computation is via shared memory. I wrote a stack language compiler for the CPU.

Custom parallel processors in Verilog/FPGA

bruce-land Bruce Land

An Intel 8085-based computer

Bentendo 6004

A series of m68k-based single-board computers built to run Linux

Mackerel-68k Linux SBCs

colin-m Colin M

My 'modern' take on the Tandy TRS-80 Model 100.

VCF-80 Model 100

evan-scheel Evan Scheel

[R]eduction to [A]lgorithms of [V]ersatile [E]soteric m[N]eumonics

R.A.V.E.N. -- A Transistorised Brainfuck Computer

blair-vidakovich Blair Vidakovich

BASIC for the 8080 and Z80, fits in 1K of memory, runs BASIC games on a 2K system. Features similar to Palo Alto Tiny BASIC.

One kilobyte Tiny BASIC for the 8080 and Z80

willstevens will.stevens

Producing a Functional Clone of the Apple Lisa 2/5, using NOS components.

A Brand New Apple Lisa

Hardware solution to fit a PXIe modular measurement instrument into a regular desktop PC

Industrial 6GHz RF analyzer/generator in a desktop

UART hacking a low cost DVB-S2 receiver box based on MStar MIPS32 chipset

Manhattan SX - Hacking a low cost DVB-S2 receiver

This project uses a Teensy 4.0 and a small PCB as a ROM Emulator

Teensy ROM Emulator

ted-fried Ted Fried

Is it possible to bootstrap a simple ROMless Z80 system using only two wires - e.g. from an RS232 interface? This project explores this.

Bootstrapping a ROMless Z80 using RS-232

willstevens will.stevens