Close

Recent Projects

Building bio inspired realistic looking humanoid robots to do chores and sports and stuff.
Project Owner Contributor

My Advanced Realistic Humanoid Robots Project

larryLarry

I'd like to build a teletype-style terminal using an Alphacom thermal printer and a decent keyboard that will work with any RC2014
Project Owner Contributor

MCU-less teletype terminal using Alphacom printer

shiela-dixonShiela Dixon

OCRd and typeset as html where possible. A work in progress.
Project Owner Contributor

Applix 1616 Documentation

keithKeith

A complete low-power gamma ray spectrometer that can be used by itself or integrated into other projects
Project Owner Contributor

Pomelo: Gamma Spectroscopy Module

mihaicuciucmihai.cuciuc

A genuine NEC V20 CPU with the entire PC/XT chipset in an FPGA. Boots MS-DOS 4.01 from a USB disk at 10 MHz. Built for my father.
Project Owner Contributor

Gertieboard PC XT: 8088 CPU Board + FPGA chipset

mathijs-van-den-bergMathijs van den Berg

Handheld AI assistant that runs entirely on-device: local tool-calling, local voice, local model, local knowledge.
Project Owner Contributor

TaqaBuddy — a fully offline AI assistant

adam-abu-taqaAdam Abu-Taqa

An isolated firmware debugging probe
Project Owner Contributor

Grapple Probe

jonathan-herbstJonathan Herbst

Network Lab
Project Owner Contributor

Home_LAB

rhea-raeRhea Rae

A Real-time PREEMPT_RT Linux images for BeaglePlay & BeagleBone Black with IEEE 1588 PTP clock sync and oscilloscope-verified timings
Project Owner Contributor

PTP Real-Time Linux Images for BeaglePlay & BBB

parag_Parag_

Closed-loop OpenWrt porting: an agent controls power and EDL, flashes images, reads UART, diagnoses failures, and tries again.
Project Owner Contributor

OpenWrt Porting, Hands Off

someone-unknownSomeone Unknown

A 1986 thermal inkjet that speaks PCL because the interpreter lives inside the printer now. Any modern host prints to it with a stock driver
Project Owner Contributor

PCL3 raster interpreter for Kodak Diconix 150

thernd2TheRND2

Explore the computer byte with this educational easy-to-solder kit. Toggle in 8 bits and see their decimal, hex or octal value. With game!
Project Owner Contributor

8-bit Workbench ED: hands-on with number systems

nijssenNijssen

A replacement for S-CPU based on the ICE40HX8K FPGA (WIP)
Project Owner Contributor

FPGA based SNES CPU replacement

leonllrmcleonllrmc

A freeform brass wire sculpture featuring a round capacitive touch screen, 6-axis IMU auto-rotation, and reactive led filaments.
Project Owner Contributor

YUMO SMART CUBE: Touch screen/ESP32-S3 Brass Wire

yumobuildsYUMO.BUILDS

Tiny ESP32-C3 desk gadget with OLED, live weather sensing, proximity glow & a phone-controlled web interface.
Project Owner Contributor

YUMO PULSE — ESP32-C3 Desk Gadget

yumobuildsYUMO.BUILDS

A hand-bent 1.5mm brass wire clock sculpture powered by ESP32-C3 with NTP time sync, hardware-multiplexed 7-segment display, and 5-stage SK
Project Owner Contributor

YUMO GLOBE

yumobuildsYUMO.BUILDS

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2026 Hackaday