0%

0%

romaindurocher

Day job as an electronic technician & woodworker hobbyist, trying to mix both !

Montreal

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

instagram

This user joined on 08/23/2020.

My Projects

A WiFi clock who also displays temperature & weather if it turns bad !

WiFi Clock

Projects I Like & Follow

Breaking the encryption on the Lerdge series mainboards so I can try porting Marlin 2.0 to it.

Lerdge 3d Printer Mainboard Hacking

jc-nelson J.C. Nelson

The 2016 Hackaday Prize

This project aims to build a tilt sensor that is cheap, very accurate and has a wide measuring range (up to 360 degrees).

A new high accuracy tilt sensor

aron-molnar Aron Molnar

SATtiny is a solar Circuit Sculpture in a form of a satellite with blinking LEDs with optimized current consumption to last all night long.

SATtiny

ricardo-sappia Ricardo Sappia

The 2017 Hackaday Prize

Depth perception and obstacle detection glasses for the visually impaired using ultrasonic sensors and a binaural soundscape environment

SonicScape (Binaural Sensor Glasses for the Blind)

pawit-kochakarn Pawit Kochakarn

A 7 segment display Arduino clock with RTC, alarm and brightness control.

Yet Another Arduino Clock

wall-hanging sound and light sculpture

waldian

The tree of life is a very popular wire sculpture, but this design is different since it has LED's to the end of branches to light it up.

Freeform tree of life with LED's

sander-van-de-bor Sander van de Bor

A 6 digit Nixie Tube Clock with RGB lighting

Nixie Tube Clock

Here we will establish a connection between the HC-05 ( connected to ATmega8 ) and an android Bluetooth app to blink a LED.

Interfacing HC-05 Bluetooth module with ATmega8

electronicsforgeeks

I built my own LED cube. The only difference from others is that it's spherical and has no circuit board.

Freeform LED Sphere

ji-praus Jiří Praus

Transfer images over Bluetooth between an Arduino and an Android phone.

Bluetooth Camera with Arduino UNO

A board for two Raspberry Pi cameras (OV5674) placed as close to each other as possible

Dual camera board for OV5674

The 2017 Hackaday Prize

Use GPG, a Raspberry Pi and a ESP8266 to safely store your passwords - soon with GnuPG Smart Card support

hardpass0.2: hardware passwd manager w/ smart card

A retrocomputer and CPU exerciser for classic 8-bit CPUs.

SDC_One

A quick, fun project with a few components and a few tools to eventually make a circuit that can be used on a DIY robot or on its own.

Obstacle Detection Circuit using BC547 w/ UTSOURCE

The ultimate machine: There is something unspeakably sinister about a machine that does nothing—absolutely nothing—except switch itself off

The intelligent rebounced RCX switch

Electronic “paper crane”

Orizuru

tauno-erik Tauno Erik

An esp8266 based binary city clock fork

Another City Clock

grgory-paul Grégory Paul

View all

Bits