Alan FeltThings I've Built
Puzzle Cylinder
This is a custom designed (by me) puzzle. I machined the inner locking mechanism myself but the outer shell had to be 3D printed due to its difficult to machine geometry. Ball bearings hold the puzzle together (not shown)
BYU Mars Rover
Our team at BYU is designing and building a rover for the University Rover Challenge held in June. I am over the power distribution board and battery as well as PCB design/ verification and some kinematics programming.
4 DOF Parallel Linkage Robot Arm
The 3D printed model was found on Thingiverse and assembled by myself. I implemented my own control code and forward/ inverse kinematics using the arm geometry. Control is implemented with MATLAB over serial to an Arduino running GRBL.
shlonkin
Lutetium
Gabrael Levine
Ted Yapo
TheMarpe
colton.baldridge
David Brown
Dominik Meffert
Alana B
Stefan Wagner