0%

0%

SHIVANI

I AM AN ELECTRONICS ENGINEER WHO FELL IN LOVE WITH DRONES WHEN I MADE MY FINAL YEAR PROJECT WITH IT.

MUMBAI,INDIA

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 08/02/2018.

My Projects

Generally we have only seen drones fly, but how cool would it be if we can maneuver it on the ground as well!

HYBRID DRONE

shivani SHIVANI

Methane and alcohol sensing using drone

Methane Sensing Drone

shivani SHIVANI

Play Table Tennis using a drone.

TableTennis Drone

shivani SHIVANI

Things I've Built

I HAVE BUILT A PROJECT WHERE IN I MADE A QUADCOPTER THAT WOULD CARRY A FLOAT WHICH WOULD SAVE THE LIVES OF DROWNING PEOPLE. THE DRONE WAS REMOTE CONTROLLED AND I TROIED TO MAKE IT AUTONOMOUS USING GPS

Projects I Like & Follow

The 2017 Hackaday Prize

3D printable, Open Source Hardware, tripod kinematics, cable driven 3D printer

Arcus-3D-C1 - Cable 3D printer

Using the sensors and controller of a drone , I created a rover to use the drone stability features on the ground.

PlutoX Rover

siddharthc siddharth.c

The 2017 Hackaday Prize

Control your mobile device remotely without using the touch screen

Tactile Remote Control of a Mobile Device

kyle-thomas Kyle Thomas

Rock solid mount that allows the bed to expand when heated.

Kinematic Mount for 3D Printer Bed

mark-rehorst Mark Rehorst

This project is a answer to question "How a DIY nano drone look,feel and fly made out of MDF ,3D printed parts?".

DIY Nano Drone

ramkumar-r RAMKUMAR R

A workshop on IOT including a simple IOT device using Wemos D1, a DS18B20 temperature sensor, a battery shield and a rechargeable battery.

Simple IOT

radu-motisan Radu Motisan

I used the Primus X flight controller board to manoeuvre an extremely agile hover-craft frame I designed.

Hover-Craft

siddharthc siddharth.c

A gyro stabilised rc plane that flies with no control surfaces.

Rc Delta Wing Mini

siddharthc siddharth.c

How cool would it be if we could control our drone just with our wrist movements

WRISTBAND CONTROLLER USING PLUTOX

tanmay-karpe Tanmay Karpe

Circuito is a DIY controlling pad that works as a supplementary project can control any Arduino device.

Circuito Arduino Controller Pad

ahmed-azouz Ahmed Azouz

A design for a micro foldable Drone

Foldable Pocket Drone

siddharthc siddharth.c

WiLoader: The WiFi programmer for AVR and Arduino

WiLoader

This project is customizing the canopy of the nano drone.So the drone get character and personality.And fun for us :)

The Shield

ramkumar-r RAMKUMAR R

Controlling PlutoX takeoff with just a snap

Clap to Fly A Drone

tanmay-karpe Tanmay Karpe

I built a reflow oven based on the Controleo2 with added hardware.

Controleo2 Based Reflow Oven

mark-goldberg Mark Goldberg

An Off Road 1/8 scale Truck for racing.

Rc 1/8 Scale Nitro Fuel Monster Truck

siddharthc siddharth.c

I upgraded the firmaware on my PlutoX (PrimusX) flight controller to fly a hexcopter frame I designed.

170mm Hexcopter

siddharthc siddharth.c

This project is customizing the canopy of the nano drone.So the drone get character and personality.And fun for us :)

The BAT

ramkumar-r RAMKUMAR R

View all

Bits