0%

0%

SdtElectronics

Third year in communication technology

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 06/13/2020.

My Projects

USB-PD sink with headers compatible with breadboard. Features a fixed 3.3V supply and one-click voltage selection without incorporating MCUs

Low-cost USB-PD Sink for Breadboard (and More)

Use a C/C++ REPL to have an interactive development experience like microPython, but with no limitation in APIs!

Run A C/C++ Interpreter on Your ARM-based Board

Want a piece of RISC-V hardware to play with, but are concerning with the price? Why not build one by yourself with a cost less than 10$!

The Cheapest RISC-V 64 Computer (by Now)

Tiny Breakout Board for I²C 16-channel, 12-bit PWM Controller PCA9685

i2c PWM Expander PCA9685 Breakout Board

Tiny Breakout Board for CH551G/CH552G/CH554G 8-bit MCUs

CH55xG Tiny

Monitoring system load, memory utilization, network throughput and uptime on a 1602 LCD driven by LPT port

1602 System Monitor Driven By Parallel Port

View all 7 projects

Projects I Like & Follow

The 2016 Hackaday Prize

Building an HMD with no special parts, to make work easier and safer

Arduino Glasses a HMD for Multimeter

alain-mauer Alain Mauer

The 2018 Hackaday Prize

The Automatic Infinite 3D Printer (i3D) gives anyone the power of a factory.

Automatic Infinite 3D Printer

swaleh-owais Swaleh Owais

The 2018 Hackaday Prize

AMS's new AS7265X 3-chip set promises a compact, 18-channel, 20 nm FWMH spectrometer for less than $25

Compact, $25 spectrometer

kris-winer Kris Winer

8 GHz BW, up to 1 TS/s ET Sampling I have ceased active development on this project. Please don't ask.

8 GHz Sampling Oscilloscope

ted-yapo Ted Yapo

Improved ZVS Mazzilli driver, optimized for high frequency and high voltage.

Piernas's Fast ZVS Mazzilli Driver

francisco-piernas Francisco Piernas

Hackaday Prize 2019

It is compatible with standard stepper motor diver, cnc or GRBL shield, direct replacement of X-Y stepper motors.

2D stepper motor etched on PCB - micro manipulator

30 - 6000 MHz synthesizer with power amplifier

Microwave Transmitter

Hackaday Prize 2020

Augmenting materials with electrical properties ⚡⚗️

PolySense

cedric-honnet Cedric Honnet

3D printed toroidally wound axial flux permanent magnet air core motor. 3DTAFPM?

3D Printed Axial Flux Motor

colby-johnson Colby Johnson

Hackaday Prize 2019

cheap artificial pseudo-muscles here

linear actuations for everyone!

CapitanVeshdoki

The 8Q is an 8 qubit, general purpose, linux capable quantum computer

8Q: The DIY Quantum Computer

noah-wood Noah Wood

BFG591 introduction, #replacement, application

BFG591 NPN 7 GHz Wideband Transistor

An Open Source TOTP based hardware authenticator using ESP32.

Open Authenticator

vedant-paranjape Vedant Paranjape

A project for storing facts, general rules, not very well known information only found in scientific books/articles and forgotten knowledge.

Microwave stuff - what to do and what to avoid

ms-boss MS-BOSS

Bat like sonar sensor that can track multiple targets and estimate angle of arrival using chirps and cross correlation in near real time.

Bat Sonar

filip-mulier Filip Mulier

The 2018 Hackaday Prize

Did you know you could generate 2.7 vdc at 3 w/hr with just a pencil, paper, Teflon tape, a 3000 ufd capacitor, and a little elbow grease?

Power Harvesting with Triboelectric Generator

chris-jones chris jones

A functionnal harvester able to collect wasted EM wave’s energy and transform it into electricity to supply various ultra-low power sensors.

µWave Energy Harvester

loann-boudin Loann Boudin

Because I need it, I can and I'm cheap. So maybe I'll do.

Quick & Dirty Frequency Generator

yann-guidon-ygdes Yann Guidon / YGDES

View all

Bits

Kris Winer wrote 07/28/2020 at 15:40

Thanks for following my Compact, $25 spectrometer project!

Are you sure? yes | no