0%

0%

Yohan Hadji

I'm 18 and working on few space related projects

Grenoble - Lausanne

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 12/28/2020.

My Projects

2021 Hackaday Prize

GPS Guided Parachute Recovery System - Making Radiosondes Reusable

R2Home

yohan-hadji Yohan Hadji

Things I've Built

R2Home

R2Home allow any payload in free fall to guide automatically its return to the ground and land on a precise location

SuperAntennaz

SuperAntennaz is an antenna rotator designed for satellite traking.

Projects I Like & Follow

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

damian-lickindorf Damian Lickindorf

Single rotor, "singlecopter", selfmade drone with air vanes for position control as a full remake of the Ball-Drone Project

The Ball-Drone Project MK II

benjamin-prescher Benjamin Prescher

2021 Hackaday Prize

A fully 3D-Printable VTOL aircraft, designed as a hybrid fixed-wing plank + tricopter planform. For FPV and UAV experimentation.

MiniHawk VTOL

steve-carlson Steve Carlson

Internet radio and BT speaker in a small form factor with minimalistic user interface

ESP32-based internet radio and bluetooth speaker

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

benjamin-prescher Benjamin Prescher

Supplyframe DesignLab: 2022 Hackada…

A tiny board with AEM10941 solar harvesting IC charging a Lithium Ion Capacitor

Solar harvesting into Lithium Ion Capacitor

jasper-sikken Jasper Sikken

An Arduino powered flow-meter for use in geography river studies and environmental monitoring projects

Open Flow Meter

oshpark

Wristwatch form-factor conference badge

Open Hardware Summit 2020 badge

oshpark oshpark

2021 Hackaday Prize

Considerate conservation and climate science is on the horizon. These robots are developed to work in multi-species flocks for GOOD!

Project Bird Fish - Free Flight Robotics

A 3D printed drone with an added pusher motor

3D Printable VTOL EDF Jet

harry-gao Harry Gao

Whipe anyones SD card on the ski slope - BLE commands for remote control with DIY devices

Insta360 X3 BLE remote control with ESP32

You get what you pay for!

Cheap But Crummy 10 GHz Transmitter and Receiver

this is easy project with simple 8 blocks How to Build your Own Spectrum Analyzer software using GNU-RADIO Companion under Win10 easy !

Build Your Own Spectrum Analyzer GNU RADIO Win10

This workshop is focused on reverse engineering and utilizing hardware-level debuggers.

Remoticon: The Hackers Guide to Hardware Debugging

A CNC machine made using PLA and a common 3d printer. All of the software & electronics are open source or off-the-shelf components.

3D Printed CNC

2021 Hackaday Prize

A compact, easy to use desktop robot bartender that doesn't ask for tips!

Mini Bartender Robot

In this workshop, we'll make 3 different kinds of origami shapes.

Remoticon: Making Glowy Origami

Arduino based autopilot system for any parachute

ParaDrone: Autopilot for Parachutes

View all

Bits