Close
0%
0%

Ángel Cervera Claudio

Following
Send a private message
Similar accounts worth following
2 Followers
35 Following
1 Projects
0 Likes
ngel-cervera-claudio
Send a private message

This user joined on 12/17/2017.

305
0
0
13€ Recycled 20 cores Homemade Cluster
Project Owner Contributor

Homemade Cluster

ngel-cervera-claudioÁngel Cervera Claudio

50k
412
17
339
A mostly printed digital microscope powered by a Rasperry Pi Zero W
Project Owner Contributor

Pi Microscope

braunscncBraunsCNC

49.4k
4k
4
99
The LittleArm is a 3D printed Arduino robot arm created for Makers and STEM education
Project Owner Contributor

LittleArm: 3D Printed Arduino Robot Arm

slantconceptsslantconcepts

16.6k
3.9k
24
69
A digital 24 hour clock using only relays and diodes for the counting logic.
Project Owner Contributor

Relay Logic Clock

dave-gnnerDave Gönner

12.2k
9.4k
19
70
A robot to sail around the world alone
Project Owner Contributor

Ladon Project

pierce-nicholsPierce Nichols

6.7k
573
7
43
The idea is to create an accesible prosthetic hand that is commercially available in Colombia and doesn't use the classic string system.
Project Owner Contributor

TNS 1i

giovanni-lealGiovanni Leal

4.8k
1.9k
7
57
Sisyphish is based on the Sisyphus Table by Bruce Shapiro, but it incorporates water and Taiwan Bee Shrimp into the mix!
Project Owner Contributor

Sisyphish - A Kinetic Art Fish Tank

zachfrewzachfrew

2.7k
1.4k
0
6
This is my diy UPS hat that i use with my raspberry pi 3. It can power the raspberry up to 11 minuites when the micro usb power drops.
Project Owner Contributor

DIY Raspberry Pi UPS Hat (Up to 11min power)

dimitris-matsoukasDimitris Matsoukas

2.1k
220
1
13
'The Sunflower' is an Arduino based solar tracker which will increase the efficiency of the solar panel while charging.
Project Owner Contributor

Sunflower - Arduino Solar Tracker

naman-chauhanNaman Chauhan

1.7k
1.7k
0
1
How I Assembled a Wheeled Telepresence Robot.” Endurance’s Technologies
Project Owner Contributor

The Start of the Project. Part 1.1.

george-i-fomitchevGeorge I Fomitchev

1.6k
2.2k
0
8
START SWITCHING . . . !
Project Owner Contributor

Home Automation using Raspberry Pi ( IoT )

kumaravelKumaravel

1.2k
1.2k
4
5
Fixing a broken scale with DIY hardware
Project Owner Contributor

DIY Body Scale

benjaminBenjamin

995
1.2k
0
6
A Small Board with 2kb USB Micronucleus Bootloader Based on Attiny85 with USB Slot.
Project Owner Contributor

Arduino Tiny Relaisboard

schuppSchupp

755
479
2
5
Mezzo allows your guests to understand which listening/seeing systems are in use in your house and opt-out if desired
Project Owner Contributor

Mezzo - informed consent for IoT

akaAKA

532
1.9k
0
16
An object avoiding robot built with the DPT-Board+ and the DPT-Robot kit by university students and programmed in Javascript through WiFi
Project Owner Contributor

Object avoiding robot with DPT-Board

daan-papeDaan Pape

516
348
0
6
Develop a low cost, open source, waste plastic extruder.
Project Owner Contributor

Recyclebot

mostMOST

470
631
0
0
Raspberry Pi direct conversion receiver JSON receiver
Project Owner Contributor

Raspberry Pi IoT DC RX

marcus-bergMarcus Berg

354
830
0
1
Keeps your cards safe with a printable design
Project Owner Contributor

3D Printed Minimalist Wallet - Reloaded

alex-andersonAlex Anderson

215
208
0
3
Build like a Rockstar! Software continuous integration build status on a guitar fretboard. Updated for Circle CI compatibility
Project Owner Contributor

The FretBoard

paul-gallagherPaul Gallagher

View all

Share this profile

Share

Bits

Send a private message to Ángel Cervera Claudio

Become cool instantly

Create your Hackaday.io profile like Ángel Cervera Claudio and many others

By using our website and services, you expressly agree to the placement of our performance, functionality, and advertising cookies. Learn More

Report user as inappropriate

You are about to report the user "Ángel Cervera Claudio", please tell us the reason.