Close
0%
0%

andrew.crockford

s/w by profession, home automation by hobby

Following
Send a private message
Similar accounts worth following
2 Followers
25 Following
3 Projects
15 Likes
andrewcrockford
Send a private message

This user joined on 11/03/2016.

6.5k
19
3
11
Low cost 40 way digital I/O board, used to extend available IO to the loxone miniserver. Based on teensy 2.0 ++
Project Owner Contributor

40-way Ethernet Digital I/O extension for Loxone

andrewcrockfordandrew.crockford

2.1k
6
4
4
Very low cost, easy to make 1-wire temperature sensors
Project Owner Contributor

1-wire temperature sensor inside light switch

andrewcrockfordandrew.crockford

1.3k
835
0
0
3D printed mount for reed switch, to connect my itron gas meter to the loxone home automation system
Project Owner Contributor

gas meter reed switch pulse counter

andrewcrockfordandrew.crockford

96.2k
1,332.9k
76
2k
Follow for the 'Hacklet' and latest news about hackaday.io
Project Owner Contributor

Hackaday.io Project

lutetiumLutetium

46.6k
995
35
135
It can power the Raspberry Pi Zero over Ethernet. The board also adds an Ethernet Phy to the Raspberry Pi Zero to give you full Ethernet
Project Owner Contributor

PoEPi: Pi Zero Power over Ethernet with PHY

julienjulien

29.5k
171
29
99
The lead-acid batteries of my off-grid solar system are dead. I will replace them by a 18650 batteries stack housed in a big wooden box.
Project Owner Contributor

A 110 kWh Powerbucket

michel-kuenemannMichel Kuenemann

20k
888
1
11
Wirelessly control a humidifier based on time and humidity
Project Owner Contributor

Control a Humidifier with a Raspberry Pi

fizixFiZiX

15.2k
8.1k
1
20
Home automation using the Loxone series of home automation products along with hacks to extend functionality and reduce cost
Project Owner Contributor

Commercial home automation

ian-nortonIan Norton

12.4k
21
0
10
Cheap low power smarthome extension board with Ethernet/Modbus/1-wire/DMX512/Wifi connection
Project Owner Contributor

Cheap Ethernet IO extension board for smarthome

markbngmarkbng

3.5k
1.1k
5
25
A plastic recycling system for 3D printers...junk goes in, filament comes out! Fully integrated, automated, novel tech & closed loop control
Project Owner Contributor

ProtoCycler

dennon-oostermanDennon Oosterman

983
1.2k
0
6
A Small Board with 2kb USB Micronucleus Bootloader Based on Attiny85 with USB Slot.
Project Owner Contributor

Arduino Tiny Relaisboard

schuppSchupp

Share this profile

Share

Bits

Send a private message to andrew.crockford

Become cool instantly

Create your Hackaday.io profile like andrew.crockford and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "andrew.crockford", please tell us the reason.