My Projects
Dilshan JayakodyThings I've Built
Audio amplifier with PLL synthesized FM radio
This is high quality stereo audio amplifier with PLL synthesized FM radio receiver based on ATmega32A, TT502 (TEA5767) stereo FM radio module, PT2314 audio processor and μPC2002 audio power amplifier.
Optically controlled servo motor
This is demonstration project to control servo motor movement using physical marker and normal video camera. In this project video camera capture the movements of marker and calculate servo's rotation angle based on that marker movement.
Low cost DC millivolt source
Cheap DC millivolt source based on commonly available LM308 precision operational amplifier, ICL8069 low voltage reference and 78L05 voltage regulator ICs.
Homebrew Audio Signal Generator
ICL8038 base AF signal generator with inverting and non-inverting outputs.
Two transistor superheterodyne shortwave receiver
This is two transistor and two IF transformer based superheterodyne receiver which is designed to receive 13m to 41m bands. With quiet good external antenna this receiver performs similar to commercially available shortwave receiver.
Pierros Papadeas
Lutetium
Benchoff
tshen2
The Big One
Bruce Land
Foxmjay
sparks.ron
Adam Fabio
Hello Dilshan,
I am very interested to build the Arduino Telephone Caller ID Unit! Could you please tell me where I can purchase the HT9032D Module PCB, and the Parts and components Required to Build the Caller ID Unit.
Your help greatly appreciated,
Massoud Sabet
massoud@tech2000-usa.com
850-375-3690