0%

0%

kaustubh

3d printing and robotics

Bangalore

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 12/08/2016.

My Projects

Uses LTC4162 to make a multi-cell battery charger that communicates over I2C port with a microcontroller.

LiPo/LiFe/PB battery charger based on LTC4162

Projects I Like & Follow

Always jealous of people who could afford big Nixie Tubes, I rolled my own alternative with WS2812Bs and laser cutting!

"Lixie", an LED alternative to the Nixie Tube

lixie-labs Lixie Labs

The WiPhone project is an open source mobile IP phone. WiPhone is intended to be hackable, modular, cheap, and open, while remaining usable.

ESP32 WiPhone

The 2017 Hackaday Prize

Open Source scanning laser rangefinder

Open Simple LIDAR

iliasam iliasam

2021 Hackaday Prize

A physical switch for my computer to choose between Linux and Windows

Hardware boot selection switch

stephen-holdaway Stephen Holdaway

Hackaday Prize 2019

bringing additive manufacturing to the next level

prism laser scanner

An indoor location system (RTLS) based on the UWB radio chip from decawave DWM1000 and an arduino.

Localino: Open Source Indoor Localization System

The 2016 Hackaday Prize

P.A.L. : Personable Autonomous Learning - Self Programming Robot that learns and grows - Each robot developes a unique personality.

P.A.L. - Self Programming AI Robot

Strain wave or harmonic drive gears are cool. As a cheap analog for metal or flex filament splined cup, try using timing belts.

Strain Wave Gear with Timing Belts

simon-merrett Simon Merrett

Hackaday Prize 2019

It is compatible with standard stepper motor diver, cnc or GRBL shield, direct replacement of X-Y stepper motors.

2D stepper motor etched on PCB - micro manipulator

Hackaday Prize 2019

Using low cost parts to construct a cable robot with incredible capabilities.

Cable Robot

Digital, portable, open source, and simple checklist for every day carry. Replace apps and paper for good.

Open Digital Checklist

The 2016 Hackaday Prize

This is a robot platform with stereo cameras and omniwheel drive. It can be connected to HMD (e.g., google cardboad, ocolus rift, ...)

Robot for telepresence and VR experiments

Audi Dynamic Turn Signal

Audi Dynamic Turn Signal

The 2016 Hackaday Prize

a novel DIY bioprinter via hijacking an ordinary 3D printer

biotINK - the bioprinter of tomorrow

julian-hofmann Julian Hofmann

ROS based 2WD, 4WD, Mecum Drive, and Ackermann Steering robots.

Linorobot - 3 New ROS compatible platforms

juan-miguel-jimeno Juan Miguel Jimeno

Hardware hacking twitch.tv stream where I work on projects and maybe play some games every once in a while

Hardware Hacking Twitch stream

j0z0r-pwn4tr0n j0z0r pwn4tr0n

The ShopArm is an easily implemented robot arm. Just train it and then use it

ShopArm: A Practical 3D Printed Robot Arm

Uses the AC400 industrial-grade Arduino-compatible as a simple hardware control system demo. Controls chlorine, heat, lighting, etc.

Hot Tub Control with Open-Source Hardware

View all

Bits