Quantity   Component name
2 × 6mm acrylic panel, 288mm x 388mm Side panel for the frame
2 × 6mm acrylic panel, 300mm x 388mm Front and back panel for frame
2 × 6mm acrylic panel, 300mm x 300m Top and bottom pieces for the enclosure
1 × 10mm acrylic panel, 288mm x 288mm Divider to separate electronics and plants
1 × 10mm x 10mm square aluminum tube Used as a cable channel for the LEDs
5 × 3W power LED's (650 - 660nm) Very powerful LEDs to simulte sunlight
5 × 3W power LED's (450nm) Very powerful LEDs to simulte sunlight
1 × 2 channel 30W LED driver (DIY) The main control board
1 × RTC with SCL and SDA interface This provides a time for the day/night cycle
1 × 24V Power supply Power for the control board
1 × ATX connector 230V mains
1 × Speaker wire to connect LED's and power "High current" wiring for LED's and power
1 × On/off button with LED (green) Software power button
1 × Power switch Switch for mains input
1 × Potato