Quantity   Component name
1 × Enermax EG465AX-VE(G) ATX Power Supply
1 × Piece of wood, 300 mm x 300 mm x 16 mm to hold the aluminum front and the power supply
1 × U-shaped Aluminum, 90 mm x 50 mm x 3 mm cross section, about 250 mm long (or something like that, I had that lying around) This holds all the connectors, switch, LEDs
1 × A few Connectors (4mm banana jacks) A pair for each voltage you want to have access to, plus one for protective ground
1 × Old ATX power supply adapters The power supply will be left untouched, it can even be swapped later.
1 × Terminal strips Connect ATX adapters to single cables
1 × Ring terminals, 2.5 mm², 8 mm diameter connect single cables to banana jacks
1 × Wire-end sleeves, 0.14mm² - 2.5 mm², twin sleeves for 2 x 1 mm² protect the cables in the terminal strips
1 × 2,5 mm² cable connect terminal strips to banana jacks
1 × Optional: LEDs and current limiting resistors If you want some eye candy.
1 × Toggle switch For power off/on
1 × Power Resistor, rated for 2 W or more, 10 Ohms Provides a load of 330 mA on the 3.3 V line
1 × Power Resistor, rated for 2 W or more, 15 Ohms Provides a load of 330 mA on the 5 V line
4 × Power Resistor, rated for 10 W or more, 27 Ohms Provide a load of 0.44 A each on the 12 V line. Can also be one resistor with a higher rating
1 × Power Resistor, rated for 1 W or more, 47 Ohms Provides a load of 106 mA on the 5 Vsb line