Quantity   Component name
1 × 30 HP vertical shaft gas engine Should equipped with a starter and alternator
1 × Pixhawk Open Source Flight Controller
2 × Clockwise Propellers (36" Diameter) See Detailed Build Instructions for Raw Materials (Forthcoming)
2 × Counter Clockwise Propellers (36" Diameter) See Detailed Build Instructions for Raw Materials (Forthcoming)
4 × Duct (37" Inner Diameter) See Detailed Build Instructions for Raw Materials (Forthcoming)
8 × Control Vane (37" Wide) See Detailed Build Instructions for Raw Materials (Forthcoming)
8 × Control Servo
1 × Throttle Servo
1 × Main Pulley (50 mm wide) HTD Pulley 50 mm wide,34 teeth, with QD Bore (Type SH)
1 × Main Pulley Bushing QD Bushing with 1 1/8" Bore
7 × Secondary Pulleys (20 mm wide) HTD Pulley 20 mm wide, 34 teeth, with QD Bore (Type SH)
7 × Idler Bushing QD Idler Bushing with 5/8" Bore (Ball Bearing)
1 × 1/4" Shaft Key 1/4" x 1/4" x 1" Shaft Key
1 × Single Sided HTD Belt (30 mm wide)
1 × Double Sided HTD Belt (30 mm wide)
1 × Starter Solenoid
1 × 5V (10 Amp) BEC Battery Elimination Circuit
1 × 12 V 4R AGM Battery Absorbed Glass Mat Battery
1 × FrSKY Delta 8 Radio Control Reciever PPM output required
1 × FrSKY TARANIS Radio Control Transmitter
1 × Master Switch
1 × Bussman Mini Fuse Box