Quantity   Component name
1 × 20' Shipping container
1 × 40mmx70mm Lumber Internals for the walls
68 × Insulation 70mm thick 1200x600mm sheets
17 × OSB (Oriented strand board) Walls
48 × Electrical (in wall) boxes "Small" For outlets and such
13 × Electrical (in wall) boxes "Large" Mounted in the roof might end up as light sockets.
125 × Flex pipe Pipes for the wires
1 × 1.5mm2 FK wire Power wiring throughout
1 × 4mm2 RK wire Supply from the CEE inlet on the outside to my internal fuse box
2 × Fuse boxes In wall mounted, one for power and one for network/low voltage
1 × 80mm Drain pipe Used for extending the ventilation though the internal wall.
1 × bunch of outlets...
10 × MCP2515 SPI2CAN bus modules https://github.com/coryjfowler/MCP_CAN_lib
4 × 80mm 12V FAN For the DIY ventilation
1 × 5VDC Power supply "POE" supply for the CAN bus
1 × Arduinos UNO, Duemilnove, Pro micro (What ever I got on hand)
1 × Bluetooth to Serial Module Gives me access to the bus so until I get a proper server set up it's an easier way to control the bus.